RIIM™ IP Mesh Network and RIIM Dashboard
RIIM™ IP Mesh Network and RIIM Dashboard
Radiocraft's industrial IoT wireless network can be monitored and analyzed using the RIIM Dashboard standalone application
Radiocrafts' RIIM (Radiocrafts industrial IP mesh) is an embedded RF system designed to be an all-inclusive, 100% automatic, easy-to-use mesh with direct IP addressing. The RF protocol is the IEEE802.15.4 g/e standard. RIIM includes an intelligent C-programmable I/O (ICI), which makes it possible to directly interface to any sensor or actuator, and it supports mist computing. RIIM does not require any license or subscription fee.
The IPM module is the core of the network and supports the complete RIIM network. The module can be configured as a border router, mesh router, or leaf node depending on the customers’ requirements in the mesh. Each node has a CoAP client/server to provide IP level access and a complete border router boxed product with Ethernet interface is available from Radiocrafts. RIIM targets networks where fast time-to-market and low engineering effort is desired.
Radiocrafts' RIIM Dashboard is a tool that allows users to analyze the network quality of their RIIM network and monitor the link quality during installation and operation. The RIIM Dashboard is a stand-alone application that can retrieve the RIIM network topology and show the network graphically and interactively. The Dashboard retrieves the border router's neighbor table to show the RSSI of the links to other nodes.
Users can retrieve the border router's node information (IP addresses and PAN ID) which saves the current network state to CSV files for later analysis in e.g. MS Excel. The RIIM Dashboard can connect to any IPv4 address and port. The RIIM Dashboard is interactive and runs in a web browser as it creates its own local web server. It can be run in OFFLINE / DEMO mode if it is not connected to a border router.
Download the RIIM Dashboard
- Short development time
- IP to the sensors/controllers from the cloud
- Self-forming, self-healing mesh network (no setup at installation)
- 10 km x 10 km urban coverage that is suitable for industrial requirements
- Global support software configurable 915 MHz or 868 MHz frequencies
- Connects to any sensor chip/controller via Radiocrafts’ ICI framework
- Future proof by over-the-air (OTA) updates
- Tailor made solutions are available through Radiocrafts' design services
- Designed to meet tough industrial requirements
- All modules are fully tested prior to shipment
- Connect to any IPv4 address and port
- No license or subscription costs
- Simple and quick network setup
- Adapts to customer needs:
- Network performance, types of sensors, etc.
- High node count
- Retrieves the RIIM network topology
- Graphically and interactively show the network
- Retrieves the node information of the border router (IP addresses and PAN ID):
- Save the current network state to CSV files for later analysis (e.g. MS Excel)
- Retrieves the border router's neighbor table, showing the RSSI of the links to other nodes
- Light controls
- Climate controls
- Access controls and security
- Agriculture
- Smart cities
- Smart buildings
- Energy management systems
RIIM™ IP Mesh Network
Image | Manufacturer Part Number | Description | Available Quantity | View Details | |
---|---|---|---|---|---|
RC1882CEF-IPM | ULTRA LOW POWER MODULE FOR RIIM | 84 - Immediate | View Details | ||
RC1882-RIIM-DK | EVAL BOARD FOR RC1882CEF-IPM | 7 - Immediate | View Details | ||
RC1882CEF-IPM-DB | RIIM DEVELOPMENT BOARD | 2 - Immediate | View Details | ||
RC1882CEF-IPM-BRB | RIIM BORDER ROUTER BOARD | 2 - Immediate | View Details | ||
RC1882CEF-IPM-SB | RIIM SENSOR BOARD | 5 - Immediate | View Details |