Battery powered 100MHz scope has plenty of interfaces
There are three models in the STO1000E PLUS series:
- STO1102E PLUS 2-channel 100MHz
- STO1152E PLUS 2-channel 150MHz
- STO1104E PLUS 4-channel 100MHz
Each includes a 70Mpoint memory, 1Gsample/s sampling (single channel only), 130,000wfm/s refresh rate and a 7.5Ah Li battery.
They have an 8″ (#200mm) 800×600 touch screen with touch, drag, and swipe, as well as button-and-knob operation.
An external USB mouse can be connected for additional control, and there is an on-screen software pop-up keyboard for data entry.
For education and demonstration, there is a built-in HDMI output.
Trigger choices include: edge, pulse width, logic, video, runt, time out , Nth edge, slope-time and serial decode.
A screen capture button provides a quick way of saving waveform images for later review or report writing, and auto-calibration is included.
Included as standard are two P130A 200MHz x10 passive probes and an external 12V power adapter.
31 types of automatic measurements are availabel as is decode for serial protocols including: UART, CAN, LIN, SPI, I2C, 1553B, and ARINC429.
For external communication, there are interfaces for Wi-Fi, LAN, HDMI, USB Host, USB Device, dc power and aux out.
8Gbyte of internal data storage is included for data files which can be transferred to a PC via a USB, LAN, or WiFi. And remote control is possible from a PC over WiFi, LAN or USB; or from an Android phone or tablet.
When the oscilloscope is connected to a LAN or WiFi network, live screen images can be transmitted to an external projector.
Saelig has web pages for the STO1104E PLUS 4-channel and the STO1102E PLUS 2-channel.